Audi
Wheel Spacers
(Hub Centric)
Slip-On
5×112 BP
57.1 bore
Starting at:

$89.99

If running AFTERMARKET wheels enter the center bore diameter of the wheel. Note: 5mm only available with lip if using aftermarket wheels or wheels with a larger center bore. If using factory wheels, leave blank

Factory Wheels
In order for a hub centric spacer to clear the vehicle hub and mount flush the thickness must be 3mm thicker than the original hub is long, or standing off the mounting surface.
Failure to accommodate for this hub protrusion can result in a spacer too thin to clear.
Returns will not be accepted due to hub clearance issues

Select remove lip for factory wheels, if factory hub flange is longer than spacer is thick.
This means wheels need to pilot on original hub
Extended lip is used in cases where the aftermarket wheel has a large relief before the bore.

Return Policy: This is a custom build.

SKU: HS5112-57-1-AUDI Category:

This pair of custom slip-on spacers fits:

  • Audi
    • A3 (’04 – ’18)
    • A4 (’97 – ’08)
    • A6 (’95 – ’11)
    • A8, Allroad (’95 – ’05)
    • R8 (’09 – ’15)
    • RS3, RS4
    • RS Q3
    • S3
    • S4 (’93 – ’09)
    • S6 (’95 – ’11)
    • TT (’08 – ’18)
    • Q2
    • Q3
    • V8

(2) Two Wheel Spacers (Slip-On)

  • 5×112 Bolt Pattern
  • Hub Centric (57.1)

Ship time: 2-3 business days

Shopping Cart